Replacement parts for the NuPulse Jetter Washer that you love! This is the place to look for replacement parts for the clean-in-place system on a pipeline (Jet Wash or Top Wash) or with a bucket washer. Sometimes trying a new part can be a great way of troubleshooting a problem with a system. The NuPulse Jet Wash System is used for the NuPulse Claws and is different than most conventional CIP units. It washes the claws upright (in the milking position) instead of upside down, which prevents the wash water from getting into the top part of the claw where the Bobbin, Diaphragm, and Spring are located.
The Delta-T Compact Unit is a single zone, energy efficient water circulating temperature control system.
This on demand water heater measures 151/4”W x 20”D x 14”H, its down-sized design saves valuable floor space and is ideal for many tight industrial environments.
It is a microprocessor-based control unit that provides efficient temperature control, quick response time, faster and more uniform heating and curing, and the ability to hold precise temperature.
This water circulating temperature control unit meets NEMA 1 electrical specifications and conforms to NEC electrical code.View full product details
Used less than 5 months, this stand is from Little Mountain Steel with cascading headlock. The end gate is included but not the ramp. The only difference between sheep and goats is the headlock is 6 inches taller on the goat. That is an easy fix! Priced at several thousand off the new price.
Location: Oklahoma City, OK
Contact: 405-589-7361, firstname.lastname@example.orgView full product details
This pair of Perfection pails work with the Surge Belly Milker Lids. It is a seamless stainless steel design. They are used pails are in good condition.View full product details
Avoid dumping milk!
It is rare that out MilkPlan Bulk Tanks fault, but if they do, you don't want to be without this package. One of these pieces might be the critical troubleshooting answer to the question "How do I fix my MilkPlan Bulk Tank?" or maybe "What is wrong with my MilkPlan Bulk Tank?"
Included is the Temperature Probe. This typically needs to be replaced if there is a discrepancy between a manual product temperature reading and the digital display on the bulk tank.
Also, an 110-volt or 220-volt Controller is included (choose the proper voltage for your sized tank from the drop down menu). This is replaced if the display begins faulting, or shows other signs of getting water in the controller box. We have included the plastic brackets and silicone cover in the case that they are damaged during the swap of controllers.
Having technical difficulties with your bulk tank? Call us at 802-763-2777View full product details
Keep a temperature probe on hand for your MilkPlan Bulk Tank. This probe fits MP Bulk Tanks from 14-gallons to 283-gallons. Easy to replace yourself!
It is rare that the MilkPlan Bulk Tanks has faults. Replacing the temperature probe is one of the first steps in troubleshooting a discrepancy between a manual reading of the product temperature and the digital reading displayed.
A great solution to the question "How do I fix my Milkplan Bulk Tank?"View full product details
A 5/8" Brush on a 99-inch long wire cable. Perfect for the 3-foot milk hose on your bucket. Scrub the inside of your milk hose in one easy step!
View full product details
Yes! We have Surge Belly Milkers!
The name "surge" comes from the natural surging action as the milker moves back and forth during milking. The movement is similar to the tug and pull of a calf. These milkers are prized for their easy cleaning- only four pieces of rubber to wash!
This is a NEAR complete Surge Belly Milker. All it needs is Inflations, Shells, Air Tubes and a Vacuum Hose.
You may choose to buy this Surge Belly Milker in a Complete Package. Choose the type and condition of the shell from the drop down menu. We will pack it up with the shells, related inflation, air tubes and a 9ft vacuum hose.
View full product details
Call or email for pricing information
We are selling our bulk tank; we no longer milk commercially. This tank worked great for 10 to 20 cows! The agitator paddle sits low in the tank and the cooling tubes are designed in a way that they do not freeze the milk. Its an 800 gallon Darikool made by Boumatic. It has one manhole toward the front of the tank. It has the compressor/temperature controls on the back. I don't know the year it was built.
In May of 2015, we had to buy a new compressor and controls for it. We quit milking in Jan, so only 7mos. use on the new compressor. The cost was $1550.
It has a new temperature gauge.
The six legs were all replaced when we purchased it which was in 2011, so they are easily adjustable.
Comes with the chart and was calibrated by our DFA rep.
It is all hooked up and easily tested just like when we used it, so you can see it in operation. We have not removed any of our milking equipment; this is the first piece we are selling.
Price is $4500. Cannot deliver. Can easily be removed out our double doors in the milk house which is easily accessible by our drive which is all flat.
Buyer is responsible for moving and must pay for unit before moving.
Please note we are in Altoona, IA which is right by Des Moines, IA - off of I80 and I35
Thanks for looking!
Altoona, IAView full product details
It's always a good idea to keep a replacement controller on hand!
You can re-use the brackets and silicone cover, or replace them as you replace the controller panel.
Controller Panel Brackets are sold in pairs.
Choose the voltage you require from the drop-down menu.View full product details
A great compound microscope with binoculars. In good condition.
Do your own somatic cell counts! Improve the parasite management program for your small ruminants by doing your own fecal counts!View full product details
Nikon Eclipse E200MV R. A great compound microscope used for somatic cell counting in our laboratory. It is in excellent condition. Sent in for a tune up August 2016 and only used for two months after that.
Do your own somatic cell testing! Improve your small ruminant parasite management and run your own fecal coutns!View full product details
These triangular inflations work well for small breed cows and standard teats alike. Use these in NuPulse Shells on the standard or FulFlo NuPulse milking claws.
Compression happens on three sides of the teats instead of two, making them work for small breed cows (ie. Jersey Cows, Milking Devons, Dexter) Milk multiple cows with a range of teat sizes when your claw has triangular inflations!
Universal brand inflations that fit NuPulse Shells and have a smaller bore than NuPulse Cow Inflations.
Set of four.View full product details
Call or email for pricing information
1 - surge belly milkers all part included $150 each
Used for 1 year 64-gallon bobwhite systems milk plan bulk tank. In great condition! Super easy to use and one of my favorite pieces of equipment. $3,200.00
Large vacuum pump used 1 year $500
Various other items and animals for sale. All in good condition and well maintained. Make me a reasonable offer! I am also willing to negotiate package deals.
Shelburne, VTView full product details
These shells are made of stainless steel. Is this the replacement shell for you? Pay particular attention to matching the air tube's port and the size of the hole at the bottom of the shell. This shell hole has an interior diameter (ID) of 3/4".
Most likely Universal Shells.
Used condition is from fair to excellent.View full product details
Feeling the Surge?
Your system won't be complete without the stylish strap and rod from which to hang your Surge Belly Milker.
Keep your cow looking good and milking happy with this classic milker.View full product details
A hose dryer, frequently used in the cleaning process of long milk hoses. Particularly good at drying the tubing from a dump station to the bulk tank after the wash process is complete. The port is for 5/8" interior diameter and can be "farm-hacked" to a 3/4" interior diameter.
The dial is a 30-minute timer!
This is a used air dryer with a new motor installed.
Important Note: May not be available for pick-up at the Royalton, Vermont store. Please call ahead. 802-763-2777View full product details
A great stainless steel pumping station for reducing labor in your non-pipeline milking system. Save steps as you milk your cows, goats or sheep into a bucket milker. After milking each animal, dump the milk into the milk transfer cart and avoid the trip to the bulk tank. The dumping station will pump the milk through a 3/4" clear hose (not included) to the bulk tank. Easily roll the cart down the aisle of your tie-stall dairy barn or parlor as you move down the line.
The dumping station will pump the milk through a 3/4" clear hose (not included) to the bulk tank. Easily roll the cart down the aisle of your tie-stall dairy barn or parlor as you move down the line.
Important Note: Not available for pick-up at the Royalton, Vermont store. This equipment will ship freight.View full product details
Get a high-quality chart recorder for a low price! We have replaced the probe, checked, and tested these chart recorders to ensure they work like new.
The Future Design DR5000 is a single-pen chart recorder used for tracking the temperature of the contents of your bulk tank. A recorder of this type is required by many states; check with your local dairy inspector to find out more details.
A Note About Installation:
While we have installed the probe into the chart recorder, you will be responsible for installing the chart recorder in your facility. Once it arrives at your facility, the chart recorder will need to be mounted, calibrated and the temperature sensor probe will need to be inserted under the outlet valve of the bulk tank. Directions will be provided and a service personnel will be available during normal business hours.
Feel free to call us if you have any specific questions about this chart recorder: 802-763-2777.View full product details
5-year-old registered jersey. Great family cow! Disease free, milk regularly tested with excellent somatic cell counts. Paperwork is available. We also have a bucket milker and 3/4 horse mini vacuum pump available. Adell is currently in milk and will be doing a pregnancy check this month. You could be up and milking in a day.
Milking equipment is 2 years old, excellent condition. Delivery is possible.
Located in: Hornell, NY 14843
Interested? Please contact:
These inflations fit the all plastic universal shell.
The Condé Vacuum Systems is designed to be permanently installed for cow, goat, and sheep multiple milking stations.
Recommendations for setting up your vacuum pump system:
The vacuum unit should be stationed in a clean, dry, and convenient area. Run a vacuum line from the 2.0" connection on the tank through the area where animals are milked. The vacuum line should be 1.5" or larger (3'' is recommended). Install stall cocks on vacuum line where bucket milkers will be operating. Automatic drain valves should be used at all low points or where risers are used on a vacuum line. Use pipe tees with a plug in one opening instead of using elbows in the furthest corners. This allows for better access for cleaning and checking air flow.
Where vacuum pump is located install the exhaust to the outside of the building. Then add oil to the reservoir on top of the pump and wire the motor.
Refill oil tank with a good grade of high detergent motor oil or vacuum pump oil. Oil level should be 1/2 or 3/4 in sight tube. Add when oil level drops to 1/4 in sight tube (see photo for recommended oil fill level).
PLEASE NOTE: These pumps often require 2 week build time. Not available for In-Store Pickup. Call 1-844-770-2777 or email, email@example.com, for a shipping quote.
Find any and all the parts you need to keep your 3/4 HP Vacuum Pump running smoothly for years to come!
All parts shown in the diagram are available in the drop-down menu.
RTD probe for use with DR-5000 Future Design Chart Recorder.
This is your chance to get a complete milking setup for a steal! Great for a small dairy looking to grow, this system can milk anywhere from 9 to 40 cows. Price is for the full package. For pricing on individual items, please contact seller.
Available to ship or pick-up May 10.
This system includes:
This DR-5000 Chart Recorder from Future Design is lightly used and in excellent condition. RTD probe installed and ready for use.
Comes complete with 6 packages of charts, and several pens.
$500 for all, OBO.
An external aide for a complete milkout. Does your cow have a slow milking quarter? This easy to use inflation adaptor may help. Adaptable to any size teat. Fits oon DeLaval and Westfalia style milking claws.
A great troubleshooting tool for your dairy.
Improves milk flow!
Made in the USA.View full product details
An electric fence voltage tester that we love! Steve Judge has been using this type of fence tester for years. A must have for rotational grazers, pasture management.
Designed for low impedance and standard duty fence controllers. It will indicate fence line or fencer voltage. Highest blinking light indicates the voltage level. 600V - 7000V
Easey to Use! Place the probe into the ground and hook the tester onto the wire.View full product details
This heavy-duty portable vacuum pump is fully assembled and easy to use. Great for an off-grid farm or barn. This pump has the capability to milk up to two buckets at a time for cows, goats, or sheep.
This Deluxe pump unit ships fully assembled by truck freight. Since there is no assembly required, it should be ready to fuel and start up. The oil level gauge is the small piece of clear hose in a U-shape on the side of the pump. Oil level should be close to the top of oil tank. To add oil, simply pop out the black plastic plug on top of moisture trap and vacuum storage tank. Milk or water that gets drawn into the pump should drain out the duckbill drain in the bottom of the tank. If too much water or milk enters the tank, the pump will need to be flushed. See the maintenance section for instructions on flushing the vacuum pump.
How to control vacuum level:
The ideal vacuum level for milking cows is between 14 and 15 inches of vacuum. Goats are 12 inches of vacuum. To adjust level, loosen the nut on top of the regulator and turn the main body to adjust. Turn the body clockwise to increase and counter-clockwise to decrease vacuum level. Tighten the nut when the desired vacuum level is reached.
Refill oil tank with a good grade of high detergent motor oil or vacuum pump oil. Oil level should be 1/2 or 3/4 in sight tube. Add when oil level drops to 1/4 in sight tube.View full product details
Ultra Start® 150 provides a source of essential nutrients to newborn calves and goat kids that do not receive an adequate quantity or quality of maternal colostrum.
• Contains a minimum of 150 grams of bovine globulin protein per calf feeding or 24 grams of bovine globulin protein per goat kid feeding.
• Made with 100% Bovine colostrum from select U.S. Grade A Dairy Herds.
• Formulated with vitamins and minerals.
• Instantized ingredients designed to mix easily and completely for easy feeding.
• Small feeding size allows for maximum intake, even in small calves.
• Supports a consistent and active approach to biosecurity.View full product details
This is the secret to having two bulk tanks and never spilling a drop of milk!
Designed for dairy operations utilizing two bulk tanks, this E-Zee Bulk Tank Overflow Alarm alerts the operator that the current bulk tank is nearing capacity and needs to be switched over to the other tank. This prevents overflowing of the bulk tank.
But how does it work...?
It's easy! Set the controller to Tank #1. As the tank fills, the milk level will activate the float on the probe and sound the alarm. The operator is alerted to switch the controller to Tank #2. This will shut off the alarm, disable probe #1 and enable probe #2 (in bulk tank #2).
The alarm is pre-wired and easy to install. It has a resettable internal circuit breaker for short circuit protection and comes with a standard 6ft 120VAC cord.
Each system comes with the Controller, 2 Probes, an Alarm, and 2 Cables. Choose between the Economy or the Deluxe Alarm in the drop-down menu. Also select the length of cable you require.
We're excited about this new size! It's small enough to fit under goat or sheep udders while being that same great quality of heavy-duty stainless steel.
This heavy-duty pail is a great accessory for any dairy. This 9-quart pail is made of heavy-duty 304 stainless steel. It is 3/32" thick (13 gauge). And it's durable enough not to be compromised in a busy dairy barn!
Available with lid. Lid for covering only, not for transport. Great for those hot summer days and keeping the barn cat or flies out of the milk!
Made in the USA. Dimensions: 8 1/2" H x 11 1/2" W
Take along a Stainless Steel Milk Tote for pasture milking.
Dual Purpose: Use this stainless steel pail in the sugarbush. Maple sugaring operations will find this to be a long-lasting and useful pail for making maple syrup.
View full product details
A rubber Y fitting that will bring the two pulsation lines into a single line. You will no longer need a twin 9/32" ID hose. Attach the rubber Y fitting to your DeLaval Style claw and add the reducer mentioned below. You will now need a 3/8" ID hose to run along the milk hose to the pulsator.
Compatible with DeLaval Standard, Delaval Superlite and WestFalia Claws.View full product details
This hose reinforcement spring will keep your hose from collapsing and kinking, allowing free flow of liquids or vacuum pressure. This spring is 6 inches long and has an interior diameter of 2.25 inches.
You may find this useful near the bucket lid of the milk or vacuum hose on your bucket milker. Do you love how flexible the silicone hose is, but hate how often it self-kinks? Here is your solution!
View full product details
The Ecto-Phyte formulation is based on the aromatic compounds found in essential oils. These oils are rich in terpenes, aldehydes, cineoles, esters and alcohols and are very antagonistic to both the adult and larval stages of insects.
Upon contact with the animals hide, the body temperature volatilizes these molecular compounds and creates a vapor around the animal. The vapor acts as an aromatic shield. Parasites such as lice which live their entire life cycle, egg through adult, on the animals' hide are immobilized by the aromatic compounds thereby interrupting the pests' cycle and eradicating the problem.
The formulation is both oil and water soluble. The dilution rate and frequency of use are dependent upon the amount of infestation and the level of ambient temperature. Elevated summer temps with high fly populations require more concentrated dilutions and daily application.
Can be used in livestock rub oilers and back-pack sprayers. Suitable for application directly on livestock and stall/parlor areas.
Makes 10 gallons of finished product.View full product details
Used 33 gal milk plan bulk tank, used 4 times after servicing.
Interested? Please contact the seller directly.
Hose reducers (barbs) to get you to the size you need!
1/2" ID to 3/8" ID - commonly used with a rubber Y to use a 3/8" pulsation line instead of the typical 9/32" twin line.
5/8" ID to 1/2" ID - commonly used to get the hose from the 5/8" NuPulse lid to the 1/2" stall cock on vacuum pumps.View full product details
This is the bottle washer of your dreams! No more hand scrubbing those hard to get spots or grumbling about dirty bottle returns!
Built to last, this user-friendly, automated washer has an easy-to-use control panel and is capable of washing 450 to 600+ bottles per hour! You can choose between 3 pre-programmed wash cycles and use just about any style bottle you can get your hands on!
Not just for the dairy farm. Use this bottle washer in the brewery for beer growlers, squealers, etc.
Call or email for pricing information
Lots of used equipment in good condition!
See all of the equipment available:
Please contact Randy Schmalstieg.
Email: firstname.lastname@example.orgView full product details
Please note: The prices represent the price PER FOOT. In your cart, you may change the item's quantity to reflect the number of feet of hosing you require.
This 1/2" rubber milk hose is an excellent choice for vacuum lines. Bring your vacuum line from your vacuum pump to the bucket from another room or your milking stanchion with this tubing. Available in 50 foot rolls.
Important Note: 50' rolls are not available for pick-up at the Royalton, Vermont store. This product is ship only.View full product details
Lose your shutoff valve? Rebuilding an old bucket milker?
As they say, the old ways are the best ways. This original design offers the easiest ever vacuum shutoff system. Simply turn the valve! No messing with little switches or toggles. Well-polished stainless steel for a smooth turn every time.
Please note: When choosing PER FOOT from the drop down menu. Once PER FOOT has been selected, choose the SIZE (Interior Diameter) needed. Add to your cart. In your cart, you may change the item's quantity to reflect the number of feet of hosing/tubing you require.
NOTE: Milk hosing should be replaced more regularly than vacuum hosing, about every 6 months or so.
Available Sizes (measurements are of the inside diameter):