Vacuum Regulator Valves are used on smaller vacuum systems such as mobile milkers to regulate and stabilize the vacuum to the required level. This simple design consists of a plunger and spring and is adjusted by closing all the vacuum inlets so the only air being drawn into the system is entering through the relief valve, to set the desired vacuum level, turn the top collar of the valve until desired vacuum level is achieved then tighten down the locking nut to keep the adjusted setting.
Recommended Vacuum Level for Cows is between 13 and 14 read on gauge.
Recommended Vacuum Level for Goats is between 11 and 12 read on gauge.
Features a 3/4'' NPT thread and brass construction.
This regulator is recommended for 1.5 HP vacuum systems.